3D printing a CNC control box for switches and a voltage/current meter

Recently I realised that my CNC setup was getting a bit complicated. For one thing, I was using three separate power adaptors: one each for the CNC itself, my 5W LASER module and the extractor fan I previously wrote about. The CNC machine has a 24V supply, whereas the other two use 12V. Also, I had separate switch locations for the CNC and fan, while the LASER had no control switch: basically power supply on and off was simply plugging or unplugging the mains plug. While still perfectly usable, I decided it was time to change that setup for something better: the 3D printed control box shown in the photo below.

The front view of the 3D printed CNC control box

As you can see, I decided to make it not just functional, but also visually in-line with a more professional look than you might expect for a cheap CNC machine. So I decided to paint it, add some inkjet-printed water-slide transfers, then clear coat it. The bumpers I gave a few coats of brass-look paint and clear coat. To finish them off I LASER-cut inserts from 1.5mm Mahogany sheet which I finished with Danish oil and some clear coat, lightly sanded to give an old-style effect. It’s not perfect, but I’m quite pleased with how it turned out.

Electrically the box contains a 24V input from my CNC power supply, which goes through an automotive voltage/current meter straight to the CNC control board. Then I connected an automotive 24V to 12V regulator to the 24V output and ran the 12V through the white switches to the LASER module and fan, together with a 12V supply for adding lights later. The spindle motor simply connects through the switch, so it can be used to isolate the motor power, as a replacement for my previous spindle switch project. And to give an idea of how I connected the box to those parts I’ve put a photo of the rear of the box below.

A view of the rear of the box showing the DC sockets

So, finally, if you’d like to make your own version why not click here to go to the Thingivers.com page, where you can download the 3D printing files, the OpenSCAD code for adapting if necessary, the water-slide transfer images and a file for LASER-cutting the end inserts too.

Tagged : / / / / / /