Cutting 1.5mm Oak with a 5W diode-LASER

Oak is a widely used wood that crops up time and again in things like furniture and traditional building techniques. It has a distinctive look and feel, making it something that we’re likely to want to use in a CNC machine sometime. So I decided to try cutting a 1.5mm sheet of it with my 5W diode-LASER mounted on my CNC. The results are in the photo above and you’ll notice that it was relatively easy to cut (much easier than, say, Mahogany), with one pass at 75% LASER-power and a feed rate of 100 mm/min being useful settings for future cutting work. As you can see in the photo below, using a higher power, or multiple passes, can result in more charring around the edges. The Oak had a water content around 11%, after being kept indoors for a few weeks, so wasn’t overly dry or damp.

The back of the laser cut oak sheet

Leave a Reply

Your email address will not be published. Required fields are marked *